I don’t know if the owner removed the needle and with what hé measured? A needle with the dimensions: 1.8mm thickest part and 1mm. above the tip. the length of the needle is 18mm. Can it be deduced with these dimensions whether there is an 81 or 88 needle system in the machine? The furthest I get is that an 88 needle has a shank of 1.9mm.
If the machine has a 88 needle than i know the machine Will have a higher lift and a larger hook and more suitable for what i can use it…thank’s for anny sugestions! Greetings
Needle dimensions to discover subclass Claes 201.
- js_hsm
- Edelschrauber
- Beiträge: 5410
- Registriert: Montag 27. September 2021, 23:40
- Wohnort: Erkrath
- Kontaktdaten:
Re: Needle dimensions to discover subclass Claes 201.
Please use a translation program for your posts. This will make it easier for many of us here to give you relevant answers.
Gruß, Achim
Gruß, Achim
Der Maschinen(um)bauer
Adler 30,48,67,69 Pfaff 130,141,142,145,335,1222, Typical GC20606-18, Sailrite 9" Clone und.....
https://youtube.com/@Special_Solutions
BLDC-Servos https://www.naehmaschinentechnik-forum. ... 33#p119733
Adler 30,48,67,69 Pfaff 130,141,142,145,335,1222, Typical GC20606-18, Sailrite 9" Clone und.....
https://youtube.com/@Special_Solutions
BLDC-Servos https://www.naehmaschinentechnik-forum. ... 33#p119733
- adler104
- Edelschrauber
- Beiträge: 5960
- Registriert: Samstag 11. Mai 2013, 21:19
- Wohnort: Norddüütschland
Re: Needle dimensions to discover subclass Claes 201.
What subclass ist you your machine? There were 201-1, 201-2 and 201-3 AFAIK
The 201-1 and 201-2 used System 81 needles an the 201-3 used system 88 needle and therefore it is the machine with the higher foot lift.
If the Class / Subclass ist no longer visible on your machine please measure the bobbin diameter and height.
BTW are you sure 18mm? Maybe mistyped?
I have no System 81 needles but the System 88 measure 48mm from top of shank to top side of the needle hole. And the system 81 needles are shorter - hope this helps
The 201-1 and 201-2 used System 81 needles an the 201-3 used system 88 needle and therefore it is the machine with the higher foot lift.
If the Class / Subclass ist no longer visible on your machine please measure the bobbin diameter and height.
BTW are you sure 18mm? Maybe mistyped?
I have no System 81 needles but the System 88 measure 48mm from top of shank to top side of the needle hole. And the system 81 needles are shorter - hope this helps
Mit'm Öl nich sparsam sein!
--- Singer 111G156 - Singer 307G2 - Singer 29K71 - Singer 212G141 - Singer 45D91 - Singer 132K6 - Singer 108W20 - Singer 51WSV2 - Singer 246K16 - Singer 143W2 - Pfaff 368 ---
--- Singer 111G156 - Singer 307G2 - Singer 29K71 - Singer 212G141 - Singer 45D91 - Singer 132K6 - Singer 108W20 - Singer 51WSV2 - Singer 246K16 - Singer 143W2 - Pfaff 368 ---