Adler 30-1 New owner :D

Fragen und Antworten zu Nähmaschinen von Adler, Dürkopp und Dürkopp Adler.
Nachricht
Autor
4apples
Neu im Forum
Neu im Forum
Beiträge: 9
Registriert: Mittwoch 27. September 2017, 18:15

Re: Adler 30-1 New owner :D

#11 Beitrag von 4apples »

So, here is how its going... Btw. Thanks for the welcome!!. I feel so welcome! heart

Well, my first thought was, to give her a new life, I would make her all new.. But as Edelschrauber said, this will not dignify her... not showing her hard work. BUT, there is no going back now..

I want to take the top arm off, to clean it. can it be done?

I need your help, do I re grease her? Is there anything you would do, to take extra care of her?

Also, anybody know some Adler history about the machine? maybe a link to it.

(Translation in google)
Also, hier ist, wie es geht ... Btw. Danke für die Begrüßung !! Ich fühle mich so willkommen! Herz
Nun, mein erster Gedanke war, um ihr ein neues Leben zu geben, ich würde sie alle neu machen. Aber wie Edelschrauber sagte, das wird sie nicht würdigen ... nicht ihre harte Arbeit zeigen. ABER, es gibt kein Zurück jetzt
Ich brauche deine Hilfe, führe ich sie? Gibt es irgendetwas, was du tun würdest, um dich besonders um sie zu kümmern?
Auch irgendjemand kennt etwas Adler Geschichte über die Maschine? vielleicht ein Link dazu.
Du hast keine ausreichende Berechtigung, um die Dateianhänge dieses Beitrags anzusehen.

Benutzeravatar
armin_k.
Greiferpolierer
Greiferpolierer
Beiträge: 470
Registriert: Donnerstag 4. Mai 2017, 14:57
Wohnort: unten links

Re: Adler 30-1 New owner :D

#12 Beitrag von armin_k. »

OK - you did it

I would just cover it with clearcoat wink

4apples
Neu im Forum
Neu im Forum
Beiträge: 9
Registriert: Mittwoch 27. September 2017, 18:15

Re: Adler 30-1 New owner :D

#13 Beitrag von 4apples »

Anybody?

Benutzeravatar
Klaus_Carina
Edelschrauber
Edelschrauber
Beiträge: 1750
Registriert: Samstag 30. Januar 2016, 12:15
Wohnort: Deutschlands Toscana - der Kraichgau

Re: Adler 30-1 New owner :D

#14 Beitrag von Klaus_Carina »

Sorry 4apples - may be most of the "Eagles" might be simply still shocked ....
Did you try to search for Adler or a Singer 29 in our forum?
I' ll continue in German

Hallo Adlerfreunde - unser dänischer Vieräppler benötigt die Anleitung zum Zerlegen der Maschine -
(offensichtlich nicht per Flex). angel
Wenn ich mich recht entsinne, gab es hier im Forum doch sogar schon so einen Thread, fast wie ein
WIP - in dem die Maschine komplett gestrippt worden war - samt Problemen dann im Kopf die korrekte
Passung der Teile wieder hinzubekommen?? - War das evtl. keine Adler, sondern Singer?
Anker DZ-BR, F, RZ Auto,
ELNA II (BR1 u.3), Transforma,
Gritzner FK, FZ, GU, GU-K, HZB, VG, VZ,
Haid & Neu LZ, Primatic,
Necchi 512, 542, 545, 559, 592, Nora
Phoenix 353 A, 383 8K, ZZ Gloria,
Singer 18, 28, 316 G

Benutzeravatar
adler104
Edelschrauber
Edelschrauber
Beiträge: 5904
Registriert: Samstag 11. Mai 2013, 21:19
Wohnort: Norddüütschland

Re: Adler 30-1 New owner :D

#15 Beitrag von adler104 »

You have a 30-7 NOT 30-1 - thats the large hook variant of the 30-1 - even better - much harder to find and more valuable! Good score...

First step usually is removing the head and lever.

Drive out the pin the lever is attached to the casting with from BACK to FRONT. Also drive out the pin the needle bar is attached to the fork slide piece on the tip of the lever - also BACK to FRONT. Then remove the 4 screws the head is attached to the casting with.

If pins do not move apply heat with a blow torch or electric heat gun.

If you want to remove the drive cam (drives the lever) on the right end you have to drive out a tapered pin. Find out which end is narrower and drive the pin out from this end. Cam also has 1 or 2 set screws which you have to loosen and then you need a proper gear puller for removing the cam from the top shaft. Mark larger hole side on the cam and on the shaft that ensures you reassemble the cam / drive in the tapered pin correctly - machine does not work when you put on the cam incorrectly.

when done we can go on... wink

Small hint:

Since you are "new" to restoring sewing machine - better take pictures when you remove a parts so you know where it goes back on when reassembling the machine. Though - all parts usually just fit on one certain spot so reassembling its not too difficult - especially in case of a Class 30 patcher machine.
Mit'm Öl nich sparsam sein!

--- Singer 111G156 - Singer 307G2 - Singer 29K71 - Singer 212G141 - Singer 45D91 - Singer 132K6 - Singer 108W20 - Singer 51WSV2 - Singer 246K16 - Singer 143W2 - Pfaff 368 ---

4apples
Neu im Forum
Neu im Forum
Beiträge: 9
Registriert: Mittwoch 27. September 2017, 18:15

Re: Adler 30-1 New owner :D

#16 Beitrag von 4apples »

adler104 hat geschrieben:You have a 30-7 NOT 30-1 - thats the large hook variant of the 30-1 - even better - much harder to find and more valuable! Good score...

First step usually is removing the head and lever.

Drive out the pin the lever is attached to the casting with from BACK to FRONT. Also drive out the pin the needle bar is attached to the fork slide piece on the tip of the lever - also BACK to FRONT. Then remove the 4 screws the head is attached to the casting with.

If pins do not move apply heat with a blow torch or electric heat gun.

If you want to remove the drive cam (drives the lever) on the right end you have to drive out a tapered pin. Find out which end is narrower and drive the pin out from this end. Cam also has 1 or 2 set screws which you have to loosen and then you need a proper gear puller for removing the cam from the top shaft. Mark larger hole side on the cam and on the shaft that ensures you reassemble the cam / drive in the tapered pin correctly - machine does not work when you put on the cam incorrectly.

when done we can go on... wink

Small hint:

Since you are "new" to restoring sewing machine - better take pictures when you remove a parts so you know where it goes back on when reassembling the machine. Though - all parts usually just fit on one certain spot so reassembling its not too difficult - especially in case of a Class 30 patcher machine.
Perfekt!, Thank you SO much for this!! What do the 30-7 do different?

Benutzeravatar
adler104
Edelschrauber
Edelschrauber
Beiträge: 5904
Registriert: Samstag 11. Mai 2013, 21:19
Wohnort: Norddüütschland

Re: Adler 30-1 New owner :D

#17 Beitrag von adler104 »

it´s a sewing machine too - obviously biggrin The 30-7 bobbin is larger / has more thread capacity, it uses a longer needle Sytem 332 LONG (or 332 L - but don`t get confused with 332LR or 332LL) not just 332 (size matters wink in this case) and it can handle thicker materials.
Mit'm Öl nich sparsam sein!

--- Singer 111G156 - Singer 307G2 - Singer 29K71 - Singer 212G141 - Singer 45D91 - Singer 132K6 - Singer 108W20 - Singer 51WSV2 - Singer 246K16 - Singer 143W2 - Pfaff 368 ---

Sewing_Jane
Nählichtwechsler
Nählichtwechsler
Beiträge: 230
Registriert: Freitag 18. August 2017, 00:06
Wohnort: Baden-Württemberg (Zollernalbkreis)

Re: Adler 30-1 New owner :D

#18 Beitrag von Sewing_Jane »

4apples hat geschrieben: What do the 30-7 do different?
Adler 30-1: length of steel arm 47cm with small shuttle/bobbin, for normal sewing work
Adler 30-7: length of steel arm 47cm with large shuttle/bobbin and high foot stroke, for medium and heavy sewing work
Adler 30_1 vs 30_7.PNG
Du hast keine ausreichende Berechtigung, um die Dateianhänge dieses Beitrags anzusehen.
LG Sewing_Jane (Anja)

Kann man eigentlich zu viele Nähmaschinen haben?

4apples
Neu im Forum
Neu im Forum
Beiträge: 9
Registriert: Mittwoch 27. September 2017, 18:15

Re: Adler 30-1 New owner :D

#19 Beitrag von 4apples »

Good, so 5 hours of removing rust, the head unit is clean! So much rust!

What should oil should I use? just sewing machine oil for the moving parts?

"Gut, also 5 Stunden Rost entfernen, die Haupteinheit ist sauber! So viel Rost!

Was sollte Öl verwenden? nur Maschinenöl für die beweglichen Teile?"
Du hast keine ausreichende Berechtigung, um die Dateianhänge dieses Beitrags anzusehen.

Benutzeravatar
Benno1
Edelschrauber
Edelschrauber
Beiträge: 3797
Registriert: Montag 14. August 2017, 19:19
Wohnort: Graz (Österreich)

Re: Adler 30-1 New owner :D

#20 Beitrag von Benno1 »

Elna supermatic, ZZ und SU sind meine Hauptmaschinen, Singer 66, Singer-Klon von Rast & Gasser, Kayser L und noch so einige biggrin biggrin biggrin

Antworten